Timing belt pulley conveyor roller Featured Image

Ixesha ibhanti pulley conveyor roller

Inkcazelo emfutshane:

1. Ulwakhiwo olubambeneyo, ukunganyangeki, uyilo olulula.
2. Iprofayili yezinyo le-T5 ilungele ukuhanjiswa kwe-roller, i-universality ephezulu.
3. Ukubekwa ngokuchanekileyo, ukudibanisa ne-MDR kunokufanisa ukusetyenziswa kwecandelo lokutshintshwa.
4. Ukudibanisa ne-PU Timing belt inokufanisa ukusetyenziswa kwegumbi elicocekileyo kunye nezinye izinto ezisingqongileyo.
5. Ukuzithambisa kunye nokugcinwa simahla.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ingcaciso yeMveliso

I-1.I-polymer timeing pulley ifakwe ekupheleni kwe-roller, eyenza i-drive kunye nokuhambisa ngokuhlukileyo kwindawo.Ukuhanjiswa kuzinzile kwaye kune
iimpawu zesantya esiphezulu kunye nengxolo ephantsi.
2.I-bearing end cap ibandakanya ibhola echanekileyo, i-polymer housing kunye ne-end cap seal.Xa zidibene zibonelela nge-roller ekhangayo, egudileyo kwaye ebalekayo.
I-3.Uyilo lwe-cap yesiphelo lukhusela iibheringi ngokubonelela ngokugqwesileyo ukumelana nothuli kunye namanzi atshisiweyo.
4.Inomthamo omkhulu wokuhambisa, olungele ukuhanjiswa komsebenzi ophakathi.
I-5.Inokwakheka okudibeneyo kunye noyilo olulula ngaphandle koxinzelelo.
I-6.Isebenza ngakumbi ngaphandle kokutyibilika kwi-synchronous ekuhambiseni.
7.I-T5 yoyilo lwemilo yezinyo ifanelekile kwi-roller conveyor ene-versatile ephezulu.
I-8.Ukubekwa kwayo kuchanekile ngokusetyenziswa kwe-MDR ukuhlangabezana neemfuno zesicelo secandelo lomthwalo.
I-9.Ifanelekile kwigumbi elicocekileyo kunye nolunye ummandla olukhuni kunye nokusetyenziswa kwebhanti ye-synchronous PU.
10.Xa kuthelekiswa nebhanti yendabuko, ayinamanzi (akukho skidding) kwaye inamandla okusebenza kwindawo ethile embi.
11.Ayifuni ukuthanjiswa nokugcinwa lula.
I-12.Iimodeli zebhanti zexesha ezahlukeneyo zihambelana nomgama ophakathi kwendawo ye-roller.(bona isihlomelo)
13.Ifanelekile kwizicelo zesantya esiphezulu.Isantya esiphezulu sihluka ngobude kunye nobude be-roller.Isantya esiphezulu ukuya kwi-2 ~ 3m / s.
14.Ulungelelwaniso oluqhelekileyo kunye ne-anti-static design surface impedance≤106Ω.
15.Ubushushu: -5℃~+40℃
Nceda uqhagamshelane nathi ukuba ukufuma ngaphandle kolu luhlu.